SEAMER MODEL F3R
MODEL F is built in stainless steel. This machine has a main structure, which is the same for all models,made up of 75% of its components, designed to adapt to the different needs of each of our customers without altering its dimensions. This means that it can be adapted to different sizes without altering its structure. We can build it with 1-3-4-6-8 seaming heads in different sizes ranging in diameter (52.5-153 mm) and height (27-300 mm). This machine is easy to use, so any operator with the necessary instructions can make it work correctly.
It has a simple modular design which makes disassembling easy in the event of a breakdown, thus enabling any type of problem to be solved as quickly as possible.
In terms of theoretical performance, this is a machine that can close from 50-600 cans/min depending on the dimensions of the container.
INDIVIDUAL LAYOUT
SPEED
- Depending on the type of container and the sizewhich is to be processed, from 50-100 containers per minute.
- Automatic and self-regulating speed variation system. This system allows us to adapt to production fluctuations by increasing or decreasing the speed depending on the production line, thus avoiding the accumulation of containers at the entrance of the machine and favouring a continuous and regular production.
PRODUCTION RATE
F3R–> 50-100 CONTAINERS/MIN
LAYOUTS
Allows only one layout model to be operating, which can range from:
POSSIBLE COMBINATIONS
IN DIAMETER Ø73- Ø153
IN HEIGHT 50-270MM
ADJUSTABLE HEAD
The elements that come into play when adjusting the head are: the head, anchored to the upper plate on its bottom side. This, in turn, is held by 4 columns to achieve greater stability. This design creates a compact block, making its regulation possible due to a system included in the columns which, by means of the action of a geared motor, allows the height to be raised and lowered quickly according to the needs of the container to be produced.
ROTARY TABLE
The machine closes the container with less friction on mechanical parts.
- It allows to increase speed and therefore higher production.
- It allows the use of smooth lids, achieving less friction and avoiding scratches on the lid that eliminate the varnish.
- It allows to calibrate the pressure spring at the base of the plunger, reducing the resistance and thus contributing to a better-quality seal.
FEATURES
- New stainless-steel construction for cylindrical containers.
- Can diameter from 65-153 mm.
- Central head section with 3 heads for rotary can closure.
- Motorised lower table.
- Adjustable and motorised upper seaming head.
- Linear and bi-directional screw can feeder.
- Lid feeding by roller, inclined lid feeding tower.
- Motor located in the upper part of the machine.
- Gear transmission in the upper part of the machine, grease-covered crankcase.
- Can and lid feed sensor.
- Lid accumulation sensor.
- Can-lid presence safety sensor.
- Total and partial can counter.
- Liquid collection tray.
- Interior cabin light.
- Electric manual control for setting and adjustment.
- Digital colour display screen with register of the different sensors.
- Stainless-steel electrical panel incorporated in the upper part of the cabin with electronic speed variator.
- Automatic speed variation.
- Stainless-steel cabin with safety glass, with safety microswitches on the doors.
- Stainless-steel design.
- Maximum production 50-100 containers per minute, depending on size and product.