SEAMER MODEL F1R
MODEL F is built in stainless steel. This machine has a main structure, which is the same for all models, made up of 75% of its components, designed to adapt to the different needs of each of our customers without altering its dimensions. This means that it can be adapted to different sizes without altering its structure. We can build it with 1-3-4-6-8 seaming heads in different sizes ranging in diameter (52.5-153 mm) and height (27-300 mm). This machine is easy to use, so any operator with the necessary instructions can make it work correctly.
It has a simple modular design which makes disassembling easy in the event of a breakdown, thus enabling any type of problem to be solved as quickly as possible.
In terms of theoretical performance, this is a machine that can close from 50-600 cans/min depending on the dimensions of the container.
INDIVIDUAL LAYOUT
SPEED
- Depending on the type of container and the sizewhich is to be processed, from 15-35 containers per minute.
- Automatic and self-regulating speed variation system. This system allows us to adapt to production fluctuations by increasing or decreasing the speed depending on the production line, thus avoiding the accumulation of containers at the entrance of the machine and favouring a continuous and regular production.
PRODUCTION RATE
F1R–> 10-40 CONTAINERS/MIN
LAYOUTS
Allows only one layout model to be operating, which can range from:
POSSIBLE COMBINATIONS
IN DIAMETER Ø73- Ø153
IN HEIGHT 50-270MM
ADJUSTABLE HEAD
The elements that come into play when adjusting the head are: the head, anchored to the upper plate on its bottom side. This, in turn, is held by 4 columns to achieve greater stability. This design creates a compact block, making its regulation possible due to a system included in the columns which, by means of the action of a geared motor, allows the height to be raised and lowered quickly according to the needs of the container to be produced.
ROTARY TABLE
The machine closes the container with less friction on mechanical parts.
- It allows to increase speed and therefore higher production.
- It allows the use of smooth lids, achieving less friction and avoiding scratches on the lid that eliminate the varnish.
- It allows to calibrate the pressure spring at the base of the plunger, reducing the resistance and thus contributing to a better-quality seal.
FEATURES
- One seaming headfor stationary can closure.
- Two first operation and two second operation seaming rolls.
- Lid feeder with inclined stacker and selection roller.
- Lid cutting system by means of pneumatic cylinders.
- Can-lid synchronism system.
- Motor located in the upper part of the seaming head.
- Linear and bi-directional can feeder.
- Container to star cap feeder by means of cadena de dedos.
- Seaming head protected by a stainless-steel shell.
- Gear transmission in the upper part of the machine, grease-covered crankcase.
- Height adjusted seaming head.
- Lid level sensors
- Lid presence sensor
- Total and partial can counter.
- Stainless steel electrical panel with electronic speed variator.
- Stainless steel cabin with transparent plastic doors, with safety microswitches on the doors.
- Automatic speed variation.
- Stainless-steel countertop with regulators.
- Stainless-steel design. Ø 153 mm.
- Production rate 10-30 containers per minute, depending on size and product.